Often caused by a wall switch being off, a loose power cord, tripped breaker, or a faulty control panel/door latch.

Check the float switch, make sure the water valve is open, and hoses are not kinked.

A clogged drain hose or defective drain pump is usually at fault.

Clogged or broken spray arms, overloaded racks, blocked detergent dispenser, or hard water issues.

Damaged door seal, cracked spray arm, or under‑body component.

Bad heating element, wrong detergent or cycle, clogged drain, or faulty sensor.

Worn pump motor, damaged wash arm bearings, or loose mounting.

Food and grease trapped in filters or hoses.

Worn latch or misaligned hinges.

Electronic diagnostic errors indicate sensor or control problems.

Blocked or defective dispenser mechanism.